Most water heaters last for about 10 years. But even if your water heater is still working, it may be costing you more money than it needs to. Many water heaters can be repaired to extend their life and save you money on your energy bill. In this article, we will discuss some of the most common water heater problems and how to troubleshoot them.
Inspect the water heater for damage
If your water heater looks like it has been damaged, do not try to use it. Contact a professional to have it repaired or replaced. Signs of damage can include water leakage, corrosion, and cracks.
Check the water temperature
If the water coming out of your water heater is not hot enough, you may need to adjust the temperature setting. Consult your water heater’s owner’s manual to find out how to do this.
Check the water pressure
If the water pressure is too low, your water heater may not be able to produce enough hot water. Contact your local water company to increase the water pressure if necessary.
Flush the water heater
If the water coming out of your water heater is dirty or has sediment in it, you may need to flush the water heater. This will clean out the tank and improve the quality of the water. Consult your water heater’s owner’s manual to find out how to do this.
If you are having problems with your water heater, these troubleshooting tips may help. If not, contact a professional for assistance.
Check the water heater’s settings
The water heater’s thermostat may be set too low. If the water is not hot enough, increase the thermostat setting. If the water is too hot, decrease the thermostat setting.
If the water heater is not working at all, check the circuit breaker or fuse. If the breaker or fuse has tripped, reset it and try again.
If the water heater is still not working, contact Water Heater jackson MS or water heater technician for further troubleshooting.
Replace the water heater if necessary
Replacing a water heater can be a daunting task, but it is a necessary one if your water heater is not functioning properly. Here are the steps you will need to take to replace your water heater:
1. Turn off the water supply to the water heater.
2. Drain the water from the water heater tank.
3. Disconnect the water heater from the electrical outlet and remove the water heater from its mount.
4. Remove the old water heater and install the new one.
5. Reconnect the water heater to the electrical outlet and mount it in place.
6. Reconnect the water supply to the water heater and turn on the water supply valve.
7. Allow the water heater to fill with water and then turn on the power to the water heater.
8. Test the water heater to ensure it is working properly.
If you find that your water heater is not working properly, it is important to troubleshoot the problem as soon as possible. By troubleshooting the problem, you can determine whether or not you need to replace the water heater. Follow the steps above to replace your water heater if necessary.